TP-1710-1MG: Outdoor 1 pair DP box for STB module, 82 x 46 x 50 mm, snap locking, with STB module with protection

Description

Outdoor 1 pair subscriber connector unit (TP-1710-1MG) is used in terminating cables of secondary telephone networks to the cable pairs of subscriber lines. 
 
The STB module also called VX connection module provides a connection point between an exchange-side cable pair and a distribution pair. It incorporates a 5-point plug in module to provide continuity and a range of other options.
 
It is equipped with GDT (Gas Discharge Tube) arrester in side the plug-in module, which forms the protection circuit for the protection of exchange room equipments and personnel against over voltage and over current, for mainly as follows:

• The surge voltage caused by lightning on or around the outside lines.

• The short-time AC voltage inducted on external lines, when the power line, the power system or the electric railway system is broken down in the neighborhood of the outside line.

• The outside line directly collides against a 220 V power line.

 
It is especially recommended for outdoor connections where the environmental conditions are extremely aggressive.







Main Features   


• Insulation Displacement Connection

• No wire-stripping, screw and solder free

• Reliable connections

• Clear labeling

• Modular design and installations

• Gas tight connection

• One push wire insertion

• Robust long-term environmental stability

• Flexible indoor and outdoor use

• Wall or pole mountable

• Quick mounting and installation

Technical Parameters

1) Working temperature: -45℃~ 60℃

2) Storage temperature: -50℃~65℃

3) Relative humidity:  ≤85%(+30℃)

4) Atmospheric pressure: 70kPa ~106kPa

5) Appearance: the color of all metal and plastic parts is uniform, without any scratch, rust, crusting and cracks.

6) The labels are clear and complete.

7) Insulation resistance: under normal ambient conditions, after high temperature test, low temperature test, temperature varing test and humidity heat test, the insulation resistance between any two independent contacts, and/or between contacts and metal parts ≥ 1000MΩ

8) Contact resistance between contacts: under normal ambient conditions, the contact resistance between contacts ≤7 mΩ. After high temperature test, low temperature test, temperature varing test and humidity heat test, the increasing resistance ≤3 mΩ  And after inserting the connection cord (or test cord) into the module for 200 times, the increasing resistance ≤3 mΩ

9) Contact resistance between conductor and contact: under normal ambient conditions, the contact resistance between contacts ≤3 mΩ. After high temperature test, low temperature test, temperature varing test and humidity heat test, the increasing resistance ≤2 mΩ. And after terminating for 200 times, the increasing resistance ≤2 mΩ.

10) Dielectric strength: under normal ambient conditions, after high temperature test, low temperature test, temperature varing test and humidity heat test, the insulation resistance between any two independent contacts, and/or between contacts and metal parts is able to withstand an AC voltage of of 1000V (virtual value) at 45Hz~60Hz sinowave for 1 minute, without spark over and flying arc

11) Gas tight performance: contact touches the conductor at both sides, and thus forming the gas tight area, while the area of gas tight occupies ≥50% of the touched area on each side.

12)  Conductor diameter range: 0.4mm-1.05mm, while insulation ≤ 5mm

13) Pulling strength:≥25N while pulling from the vertical side of the contacts

14) Flame retardant performance: all plastic parts are flame retardant, reaching grade of UL FV0

15) Life circle: ≥200 times

16) Nominal DC spark-over voltage (100V/s) : 230±20% V

17) Impulse spark-over voltage (1kV/us): ≤750V

18) Impulse discharge current (8/20us, 10 times) (a+b)-e: 5kA

19) Impulse discharge current (10/1000us, 300times) (a+b-e):100A

20) AC discharge current (50Hz, 1s, 10 times) )(a+b)-e:5A

21) Capacitance(1kHz): ≤1.5 pF

22) Transverse voltage duration: ≤200ns

23) Fail-safe response time: ≤15s

Packing picture

Why TAEPO                                                                          

1. We are Alibaba Assessed more than 10 years Gold Supplier.

2. Warranty: 1 year. 100% QC inspection before shipment.

3. We have OEM experience more than 20 years. Every year, we do lots of OEM/ODM items for our customers.

4. We participated in many tenders each year. We are familiar with the tender procedures and documents preparations. With most competitive prices and profession in products, we are awarded dozens of tenders each year. 

5. We are the One-stop Solution Provider for Communication Connectivity Industries. With good quality, competitive price, prompt delivery and with sound after-sale service.

Workshop and Warehouse                                                                                                                                              

Quality Control                                                                                                                                                                                                             

Our Certificate and EXPO                                                                                                                                                                        

Our Customer                                                                                                                                                                                                               

Application Cases                                                                                                                                                                                                  

Shipping and Payments                                                                                                                                                                          

If you have any further question, pls let us know freely !