TAEPO -Your Professional Indoor and Outdoor DP Box Manufacturer In China !
Series of DP Boxes, Get the Competitive Price from TAEPO Now!

Descriptions   

30 pairs Distribution point box / 30 pairs DP box (TP-1704-30) is used in terminating cables of secondary telephone networks to the cable pairs of subscriber lines.
This 30 pairs box can be installed with 10 pairs LSA disconnection module  is highly reliable and cost-effective wire connection system for modern telecommunications and data networks. This module adopts IDC (Insulation Displacement Connection) technique, which means no soldering, wire-stripping or the use of screws, and which clamps the wires at a 45 degree angle, thus dramatically reducing the risk of a poor termination and increasing the wiring productivity. Contacts that ensure the highest degree of reliability even under the most adverse environmental and climatic conditions. A completely reliable, gas-tight connection between the contact and conductor.

Main Features    

• Insulation Displacement Connection

• No wire-stripping, screw and solder free

• Reliable connections

• Clear labeling

• Modular design and installations

• Gas tight connection

• One push wire insertion

• Robust long-term environmental stability

• Wall or pole mountable

• Quick mounting and installation

Technical Parameters

1) Contact resistance between contacts: under normal ambient conditions, the contact resistance between contacts ≤7 mΩ. After high temperature test, low temperature test, temperature varing test and humidity heat test, the increasing resistance ≤3 mΩ And after inserting the connection cord (or test cord) into the module for 200 times, the increasing resistance ≤3 mΩ

2) Contact resistance between conductor and contact: under normal ambient conditions, the contact resistance between contacts ≤3 mΩ. After high temperature test, low temperature test, temperature varing test and humidity heat test, the increasing resistance ≤2 mΩ. And after terminating for 200 times, the increasing resistance ≤2 mΩ.

3) Dielectric strength: under normal ambient conditions, after high temperature test, low temperature test, temperature varing test and humidity heat test, the insulation resistance between any two independent contacts, and/or between contacts and metal parts is able to withstand an AC voltage of of 1000V (virtual value) at 45Hz~60Hz sinowave for 1 minute, without spark over and flying arc

4) Gas tight performance: contact touches the conductor at both sides, and thus forming the gas tight area, while the area of gas tight occupies ≥50% of the touched area on each side.

Indoor screw locking 30 pairs DP box for LSA module


Order Data

Indoor screw locking 30 pairs DP box for LSA module