End user ADSL2+over POTS

Descriptions

ADSL splitter is an analog low-pass filter installed between analog devices (such as telephones or analog modems) and a plain old telephone service (POTS) telephone line, in order to prevent interference between such devices and a asymmetrical digital subscriber line (ADSL) service operating on the same line. Without ADSL splitter, signals or echoes from analog devices at the top of their frequency range can result in reduced performance and connection problems with ADSL service, while those from the ADSL service at the bottom of its range can result in line noise and other issues for analog devices.

Main Features

Independent design and production.

Conforms YD/T1187-2006 standards

Suitable in ADSL subscriber's premises

Complete split with DSL and the POTS

Suitable in 0-100mA POTS loop current

Three RJ11,1 input port (Line), 2 output ports (Phone, Modem)

Technical Parameters

POST PORT IMPEDANCE: Zr:600Ω//54nF

Modem impedance: 30 kHz< f< 1104 kHz 100 Ω

Nominal voice band: 0.3 kHz to 3.4 kHz

Insertion loss (Zreal(1)): @ 1k Hz<0.3dB

Delay Distortion: 200Hz-4.0KHz:<250 micro sec

DC Loop current: < 100 mA

DC resistance: < 25 Ω

Nominal voice band: 0.3 kHz to 3.4 kHz

ADSL band: 30 kHz to 1104 kHz

Return loss: 300Hz--2.0KHz:>15 dB  

2.0kHz--3.4KHz:>12dB

Stop band attenuation: 25 kHz55 dB

100 kHz65 dB  

300 kHz55 dB

Order Data

End user ADSL2+over POTS


Referenced picture for End user ADSL2+over POTS